3-layer wall panel reclaimed Sp/Fi/Pi type 3A brushed | up to 4000 mm long
The wall panelling with three-layer construction made of reclaimed wood is bevelled and offers the possibility of mounting individual planks on the wall as well as on the ceiling. The 3-layer reclaimed wood planks are supplied with longitudinal grooves on two sides and are connected with a supplied external tongue. The top lamellas in old-growth spruce/fir/pine type 3A are cut from old sub-roof boarding (1st patina), steamed and brushed. This gives them a light brown colour. By hand, all panels are patched with real wood, which ensures a natural and harmonious appearance. .
Plank widths between 100 and 300 mm, on customer request also in special or fixed widths
according to parts list or fixed lengths 1500, 1800, 2000, 2200, 2560, 3000, 3500 and 4000 mm, lengths over 4000 mm available on request
Thickness 19 mm = 6.5/6.5/6.5 mm, other thicknesses on request
The middle layer of the 3-layer wall cladding made of old wood consists of "new spruce". On customer request, we process the middle layers with special properties (e.g. fire protection or lightweight construction).
By using reclaimed wood (2nd patina) on the reverse side wall panelling remains quieter and more stable than solid wood planks or low-priced industrial productions. The backside is sanded as standard and not patched.
Range of application
The wall panelling offers a variety of applications for walls and ceilings.
Cracks or knotholes are patched by hand using only real wood. The result is a visually harmonious and natural old wood surface. We do not use silicone or similar chemical fillers for patching, as these only spoil the look and feel of a surface. Chemically repaired areas attract dust and are difficult to clean.
Only trained and motivated personnel with sufficient experience create old wood surfaces with a unique character. A harmonious appearance and consistent quality for each plank is particularly important. Precise guidelines and a great deal of intuition for a balanced grading prevent murals with a "zebra look", which disturb the overall picture and make it appear unsettled.
Optics: glue joints
The glue joints are always pressed together and form a visually uniform plank appearance. In the case of inferior industrial production, open glue joints not only impair the appearance, but also the load-bearing capacity and service life of three-layer wall panelling.
Only an infestation of the knock beetle beautifies the old wood and gives the surface a unique look. We do not use any raw wood for our three-layer wall panels that has been destroyed by the house longhorn beetle or by white, brown and blue rot.
Standards and certification
The following standards apply to reclaimed wood products:
- Fire resistance EN ISO 9239-1 and/or EN 13501-1
- formaldehyde: EN 717-1
- pressure shear test: EN 13354
- gap test: DIN 68 705-2
- CE marking for non-load-bearing construction products according to EN 13986
- Declaration of performance in spruce and oak available
|Category||Reclaimed Wood | Wall and Ceiling|
|Product group||3-layer wall panels|
|Length||according to parts list from 3501 to 4000 mm|
|Width||mixed from 8 up to 22 cm, main widths from 12 to 18 cm|
|Specie||Reclaimed Spruce original|
|Botanical name||Picea abies/Abies alba/Pinus sylvestris|
|Wood origin||Central Europe|
|Certification||not certified | CE label|
|Profile||groove-grove and separate tongue|
|Quality front||reclaimed wood 1st patina (original)|
|Wood connection||groove-grove and separate tongue|
|Humidity||10% ± 2%|
|Customs tariff number||44219900|
|Items on stock||no|
|Date of delivery||approx. 3 - 6 weeks|