The wall panelling with a three-layer construction of reclaimed wood is bevelled and offers the possibility of mounting individual planks on the wall as well as on the ceiling. The 3-layer reclaimed wood planks are tongue and groove all around. The top lamellas in reclaimed spruce/fir/pine type 1G are cut from old beams or old floor boards (2nd patina), steamed and brushed. They have an intensive worm pattern with cracks.
Plank width between 150 and 330 mm, also available in special or fixed widths at an extra charge.
falling from 1800 to 5000 mm, also available in fixed lengths at an extra charge
Thickness 19 mm = 6.5/6.5/6.5 mm, other thicknesses on request
The middle layer of the 3-layer wall cladding made of reclaimed wood consists of "new spruce".
The back is made of spruce/fir new as standard, sanded and not patched.
Range of application
The wall panelling offers a variety of possible uses for walls and ceilings.
Cracks or knotholes are repaired by hand with real wood or partially patched with old wood putty. The result is a visually harmonious and natural old wood surface. We do not use silicone or similar chemical fillers for patching, as these only disturb the look and feel of a surface. Chemically repaired areas attract dust and are difficult to clean.
Only trained and motivated personnel with sufficient experience create old wood surfaces with a unique character. A harmonious appearance and consistent quality for each plank is particularly important. Precise guidelines and a great deal of intuition for a well-balanced grading prevent murals with a "zebra look", which disturb the overall picture and make it appear unsettled.
Only an infestation of the knock beetle beautifies the old wood and gives the surface a unique look. We do not use any raw wood for our three-layer wall panels that has been destroyed by the house longhorn beetle or by white, brown and blue rot.