3-layer wall panel reclaimed Sp/Fi/Pi type 1A polished

Item No. 08-000001
The wall panelling with three-layer construction made of reclaimed wood is bevelled and offers the possibility of mounting individual planks on the wall as well as on the ceiling. The 3-layer old wood planks are supplied with longitudinal grooves on two sides and are connected with a supplied
Read full description
please inquire in stock in stock
Price
CHF 276.00
/ m2
VAT included
View volume discount
View volume discount
  • Total variants selected: 0

3-layer wall panel reclaimed Sp/Fi/Pi type 1A polished

Item No. 08-000001
Enter a correct quantity for the variants in the grid above.
UOM: m2
3-Schicht-Wandverkleidung Altholz Typ 1A Fichte/Tanne, geschliffen
please inquire
CHF 276.00 /m2 CHF 276.00 /m2
m2
Stück (je 1 m2)
3-Schicht-Wandverkleidung Fi/Ta/Fö Altholz Typ 1A geschliffen
please inquire
CHF 276.00 /m2 CHF 276.00 /m2
m2
Stück (je 1 m2)
  • Total variants selected: 0
Continue shopping
Description

The wall panelling with three-layer construction made of reclaimed wood is bevelled and offers the possibility of mounting individual planks on the wall as well as on the ceiling. The 3-layer old wood planks are supplied with longitudinal grooves on two sides and are connected with a supplied external tongue. The top lamellas in old wood spruce/fir/pine type 1A (2nd patina) are cut from old beams, lightly steamed and sanded. They have a beautiful worm pattern with slight cracks.

Available width

Plank width between 100 and 300 mm, on customer request also in special or fixed widths

Available lengths

according to parts list or fixed lengths of 1500, 1800, 2000, 2200, 2560, 3000, 3500 and 4000 mm, lengths over 4000 mm available on request.

Structure

Thickness 19 mm = 6.5/6.5/6.5 mm, other thicknesses on request

Middle layer

The middle layer of the 3-layer wall cladding made of old wood consists of "new spruce". On customer request, we process the middle layers with special properties (e.g. fire protection or lightweight construction).

Rear side/counterdraught

By using reclaimed wood (2nd patina) on the reverse side wall panelling remains quieter and more stable than solid wood planks or low-priced industrial productions. The backside is sanded as standard and not patched.

Range of application

The wall panelling offers a wide range of applications for walls and ceilings.

Optics: patching

Cracks or knotholes are patched exclusively by hand using real wood. The result is a visually harmonious and natural old wood surface. We do not use silicone or similar chemical fillers for patching, as these only spoil the look and feel of a surface. Chemically repaired areas attract dust and are difficult to clean.

Optics: grading

Only trained and motivated personnel with sufficient experience create old wood surfaces with a unique character. A harmonious appearance and consistent quality for each plank is particularly important. Precise guidelines and a great deal of intuition for a balanced grading prevent murals with a "zebra look", which disturb the overall picture and make it appear unsettled.

Optics: glue joints

The glue joints are always pressed together and form a visually uniform plank appearance. In the case of inferior industrial production, open glue joints not only impair the appearance, but also the load-bearing capacity and service life of three-layer wall panelling.

Optics: Pests

Only an infestation of the knock beetle beautifies the old wood and gives the surface a unique look. We do not use any raw wood for our three-layer wall panels that has been destroyed by the house longhorn beetle or by white, brown and blue rot.

Standards and certification

The following standards apply to reclaimed wood products:

  • Fire resistance EN ISO 9239-1 and/or EN 13501-1
  • formaldehyde: EN 717-1
  • pressure shear test: EN 13354
  • gap test: DIN 68 705-2
  • CE marking for non-load-bearing construction products according to EN 13986
  • Declaration of performance in spruce and oak available
Specifications
Category Reclaimed Wood | Wall and Ceiling
Product group 3-layer wall panels
Length according to parts list from 400 to 4000 mm
Width mixed from 8 up to 22 cm, main widths from 12 to 18 cm
Thickness 19 mm
Weight kg/m2 9.200
Specie Reclaimed Spruce steamed
Botanical name Picea abies/Abies alba/Pinus sylvestris
Wood type Softwood
Wood origin Central Europe
Manufacturing/origin Austria
Certification not certified | CE label
Colour light-brown
Hue medium colour
Profile groove-grove and separate tongue
Construction 3-layer construction
Quality front reclaimed wood 2nd patina
Wood connection groove-grove and separate tongue
Surface structure polished
Surface treatment untreated
Humidity 8% ± 2%
Customs tariff number 44219900
Packaging loosely
Items on stock no
Date of delivery approx. 3 - 6 weeks
Postal shipping nein
Documents
    Loading
    Loading