1-layer solid wood panels reclaimed Oak type 1E polished

Item No. 06-003227
The 1-layer boards or table tops with continuous slats are made from old oak log walls or oak beams. The solid wood boards with very wide slats up to 300 mm are best suited for table tops. However, the following work must be carried out: exact cutting, edge processing, surface finish (cleanly
Read full description
Price
CHF 1'212.00
price per m2
incl. tax
View volume discount
please inquire low stock level in stock
m2
Stück (je 4.025 m2)
This product cannot be ordered at the moment.
Description


The 1-layer boards or table tops with continuous slats are made from old oak log walls or oak beams. The solid wood boards with very wide slats up to 300 mm are best suited for table tops. However, the following work must be carried out: exact cutting, edge processing, surface finish (cleanly puttying, sanding, brushing, possibly hand-planing, oiling or varnishing). Choose your table top from our stock.


Quality front side: rustic, knotty, with cracks, open knots and cracks, not puttied, discolouration and colour differences possible, with a small amount of sapwood, with worm pattern, with patches or patches.
Quality reverse side: very rustic, with strong cracks and open knots, unkitted, partly not planed cleanly (differences in height), with sapwood, heavily worm-eaten



Storage

The solid wood panels may only be stored in closed, dry and not too cold rooms. The boards must not be stored near heaters, damp walls, open doors or windows and must be protected from direct sunlight. The ideal storage temperature is approx. 20 °C at a relative humidity of 45 to 55 % without large temperature fluctuations. The solid wood panels need a longer time to adjust after a large temperature change. The boards should always be stored lying down.



Transport

If possible, the boards should be transported lying down. When securing the load, always fasten the tensioning straps in line with the squared lumber so that no deformation or breakage of the boards occurs when lashing the straps.


The boards should not be left on the loading bridge of the truck overnight or over the weekend, especially in case of strong temperature fluctuations or in the winter months.



Processing

The moisture content of the boards must be measured before and after processing. The ideal wood moisture content is 8% ± 2%. The room climate in the workshop should have an air temperature of approx. 20° and a relative humidity of 35 to 55% during processing.


We recommend that you process the solid wood panels promptly in one go, i.e. ripping, routing, sleeping and lacquering. This reduces the risk of warping, as the boards can practically not absorb any moisture. The boards must be lacquered over their entire surface, even on the face side, to prevent moisture from penetrating.


Wood suffers especially during the heating period if the room climate is unhealthily too dry. Please always check your room climate and humidify if necessary.


If you do not follow these instructions, open glue joints or even warping or cracking of the wood may occur. The processing and storage instructions must be observed especially for beech wood. This hardwood reacts very strongly to changes in humidity.


Specifications
Category Reclaimed Wood | Panels
Product group 1-layer solid wood panels standard
Lengths 3500 mm
Widths 1150 mm
Thicknesses 52 mm
Tolerance of thickness ± 2.0 mm
Specie Reclaimed Oak
Botanical name Quercus spp.
Wood type Hardwood
Wood origin Croatia | Slovenia | Hungary
Manufacturing/origin Slovakia
Certification not certified
Construction 1-layer construction
Quality front reclaimed wood 2nd patina
Quality back not visible
Lamella continuous
Slat Width mixed from 80 mm and wider
Surface structure sanded, grit 80-100 | pre putty
Surface treatment untreated
Humidity 10% ± 2%
Gluing D3 nach DIN/EN204
Customs tariff number 44219900
Packaging loosely
Items on stock yes
Date of delivery approx. 3 - 6 working days
Postal shipping nein
    Loading
    Loading